Series: W50 Series
Model No.: W50/TG/600
Rated Current: 2.5A
Rated Voltage: 220V - 250V~/50-600W
Color: White or customized
Warranty: 2 years
Certificates: CB, CE, SASO
600W LED Dimmer Switch British Standard is one of the simple but trendy wiring device items in W50 series that features very wide panels and slim profile. Round corners and soft lines with smooth rotary button fully shows its aesthetic design.
Product Introduction of the 600W LED Dimmer Switch - White
1. Based on a wide plate and a no visible screws design, this dimmer switch is aesthetically pleasing and easy for cleaning.
2. The surface can be customized in a variety of stylish painting finishes (also can do varnish finish) and injection colors to match it with your place’s tone.
3. Features a quicker and easier installation or disassembling: poke into the holes below from the sides by slotted screwdriver and remove panel, then fix the dimmer on the wall by given fixing-screws, at last clip the panel back lightly.
4. Applies world-renowned brand SCR with high reliability.
5. Provide wide adjusting range and comfortable feeling, and brightness changes smoothly.
6. Simple and smooth design can be matched with all kinds of decorations at any places like house, conference hall, gallery, supermarket, studio, canteen, bar, etc.
7. USB outlets and fuse outlet available.
8. Every product will be sent by our quality control teams to our own CNAS certified laboratory to do routine tests like aging test to ensure the quality. Also, quality inspections will do during each producing progress.
9. The circuit controlling adopts computer optimized design to make the circuit structure reach the best states.
10. Has the functions of automatically adjusting the absorption of high-frequency harmonic interference, and lowering interference to the power grid and other household appliances.
Product Parameter (specification) of the 600W LED Dimmer Switch - White
|Color||White or customized|
|Material||high polymer PC|
|Dimmer control||Rotary push|
|Load type||High-pressure halogen lamp: 50-600W
Incandescent lamp: 50-600W
Low voltage halogen lamp with electronic transformer: 50-600VA
LED lamp: 50-600VA
|Protection type||Electronic short-circuit protection
Automatic overload protection
|Wire stripping length||8 mm|
|Device Mounting||Surface or Flush wall mounted|
|Fixing type||Concealed screws|
|Fixing Mode||By screw M3.5*25mm|
|Fixing Screws Material||Zinc-plated|
|Connections||Screw terminals(pillar terminal)M3*7.5mm|
|Mounting hole center distance||60.3mm|
|Contacts Material||White zine|
|Embedding Depth||35 mm|
|Ambient Air Temperature for Operation||0~45℃|
|Relative humidity||5…95 %|
|IP degree of protection||IP20|
|Application||Showroom, Bar, Cafe, House, Office...|
|Packing||1 pcs/ plastic bag 150*120mm
|Payment term||T/T, L/C, D/P...|
|Place of Origin||Guangdong, China|
|Certificate||CB, CE, SASO, GCC, ROHS, ISO9001, ISO14001, OHSAS18000|
1. This product must be installed by qualified electrician.Do not disassemble the cooling fin and back-housing.
2. Always operate the dimmer according to thetechnical data provided.
3. This product is only for adjusting lighting. Do not use it to adjust other electronic product, otherwise it might bring damage.
4. Risk of death from electric shock. Although the device is turned off there might be full voltage at the output. Always turn the device in the status of voltage free before starting with work.
5. Dimming socket outlets is prohibited. The riskof overload and connecting unsuitable dimmers is too high.
6. It's a normal phenomenonthat slight heat will be emitted from the product when it’s
7. Do not over twist the knob, otherwise it may damage the product.
8. When using the dimmer with different brand / model of dimmable LED light, the light may be flashing when approaching to minimum value.
9. When multi-loads in parallelconnection, same brand and model of loads are recommended. But please make sure the total power must not exceed the rated power.
10.Connected dimmers may be damaged if youconnect a combination of loads (inductive and capacitive) at the same time.
11. 600W LED Dimmer has overload inspection system. Power will be cut off automatically when overload. In case if overload, please reduce the load and restart the power.
12. When using 600W LED Dimmer with dimmable LED light which is less than 50W, or label-power 50W but actual power is less than 50W, the light might flash when approaching the maximum value.
Product Features and Application of the 600W LED Dimmer Switch - White
FAQ of the 300W LED Dimmer Switch - White
Q: What’s your price terms?
A: EXW, FOB SHUNDE, CFR, CIF, CNF depending on the clients’ demands.
Q: What’s the guidance of installing and operating a dimmer?
A:1. Insert the wire into the hole of copper terminal, and then tighten the screw to fix it;
2. Pull out the knob and cover(please refer to assembling introduction);
3. Fix the product to the mounting box;
4. Install the cover and knob;
5. Please strictly follow the wiring diagram of the manual for wiring installation;
6. Turn on the power and manually adjust the knob to adjust the brightness and darkness of the lamp. Turn the knob clockwise to increase the brightness, turn the knob counterclockwise to decrease the brightness.
Q: How to solve the problems after the customer receives the goods?
A: Please get back to us when there’s any problems. Our after-sale service team would help you deal with any problems when you receive our goods.
Q: How can I get in touch with you?
A: If you have any ideas or questions, please feel free to contact us by:
WHATSAPP: 86 18988672820
WEBSITE QR CODE:
FACEBOOK: GUANGDONG JINLI ELECTRICAL APPLIANCE CO., LTD.
FB QR CODE: